PDA

View Full Version : Help! Need Pass side tail lamp



joe champion
02-20-2017, 04:02 PM
Also, after replacing the front spring, I also needed a rear spring, in both cases, I only needed the spring pads. I discovered that a Corvette lowering kit will work just as good as the new spring and pads. The only change I made was I measured the thickness of the ne front pads, and set the height to match the front new pads, and added a lock nut just to be sure nothing could move .The lowering kit cost $39.00.

rexster314
02-20-2017, 09:05 PM
Just a question, what's that got to do with a tail lamp?

ccclarke
02-21-2017, 05:42 PM
Salvage yards and online sites like eBay are your best bet for discontinued parts.

CCC :wave:

Smoothran
02-22-2017, 08:42 PM
If you need the tail light assembly, I feel for you but if you just need the LEDs repaired, Vettronics repairs them.

Sent from my SM-G935P using Tapatalk