Search results

That 54 convertable is where I started my search and ended up with an 05 (Dad had a 54) never forgave him for giving it away I was on 7 at the time.

We talked about this on another blog I also purchased the same (I think might have been the last one) Because it was a 05 unit all the stearing wheel controls work! But I knotice have a sound from my origional head unit that sounds as if something is running... a hum with the ignition off. I now...

Ask me how I know these words are wisdom. I am still fixing the problem found of mine.

I read about the srx lights and board, but the priceing of that tail light has gone up to around or about $100. might as well send them out at that price rather than taking a chance of damage and or not having the repair last or a long period of time.

well to follow up on the cylinders both main roof quit and have to say one of the most diffuclt jobs I have ever done not a whole lota room in that trunk. About my mechanic I had such prase for.... he did get it through emissions but did not solve the problem which was the MAF incorrect for the...

I know late to the conversation, but something you said I would like to follow up on; You mentioned the light rebuilders are now using a "chemical release" any idea what that might be and where to find it. I will be needing to replace a few of mine (some day) after the shocks paint and what ever...

Well just checked the wheel and everything is as it should be, I will not have to take out the player again until it quits if it will ever. The mechanics of that machine is extremly involved, tore down one to atttempt to figure out how it worked finally gave up I am interested in what makes them...

Humm "I did not know that" (Johnny Carson) I will give that a test today I have plenty of mother boards now if nessary. Was so excited just to have it working I stopped there. My next install will be the BT-45 vette for the phone anyone have imput on that install?

I installed an aftermarket and went back to OEM like the look better so if anyone wants the full install kit metra face plug and play Pioneer DMH241EX Cost me $400 will sell for much less make me an offer!

I had a problem with the maps (gps) and the 6 disk not working looked around and found a used radio (ebay) and a brand new unit for an SRX $180 with a new 6 disk player the radio was useless but now have a brand new 6 disk and is origional and working saved $200 over hitech cost.

Well you have to remove the trunk divider cover and carpet nothing to do with the hydraulics no problem you got it done I must have had more access to the strut as I was replacing the left side main top cylinder at the same time because the trunk kept shutting on me and all that was removed. So...

There is no reason to unscrew anything the access is at the bottom both sides all that is needed is a flat head screw driver to hold the clip open at the bottom then pull it out after the socket is in the knob.

Okay i'm confused; new mags are for the very rich! Here's my question/ problem when I go over a depression on the road at say 45 I hit my head on the roof, now will new mag's or bilsteins fix that, and what is the nature of the changing the sway bar? Not using it for street racing just the cruse...

There is a Gm bullenton on this issue in order to check to see if it is install you will need to remove the knee bolister and with a flash light look at the wiring connector located on the stearing wheel position sensor.

Ya we been raining here also been cleaning the hydraulic fluid off the trunk floor and replacing the cylinder on the other side main roof lift. The best advice is if you replace one the other side needs to be replaced. I'd rather do it now than wait till summer gets here as this job is a real...

Might be late to this post but just by chance have you checked the fluid level at the pump?

Well the cylinders are all the work; I did one and thought that would solve the fluid loss and even looked (I thought) at the other side dreading having to do both. Dread or not it was leaking also (ya mickytee should have bought yours) any way off the be rebuilt! Replacing the cylinder should...

well was it as easy as suggested?

Welcome there are a few newbee's and some seasoned members all are learning from each other.

Looks like a good choice, let know if it meets your expectations.