Search results

Been there done that cataclean, seafoam. Well I think this journey has come to the end (with fingers crossed) the codes are resolved; the electrical tape lead me down the path of the MAF not being the correct one. I changed it to a AC Delco factory and for now seems to have corrected the...

Got to get this lean code done!!!!!

Gotta try to get the trims at the lower levels I have ran out of parts, ideas not as concerned about the hp gain as the fuel trims. I have made one more attempt with the MAF and I believe I mentioned have bought a ACDELCO part. (thinking the other one was not right calibration for this engine) I...

Those screws were the shizzel! I was able to install them myself with out help, used a pole on one end to prop up one end then worked a side at a time best remove both side screws as it allows enough play to "wiggle" them on to the post. Now when i'm laying on my back to install the leaking roof...

Paid $800 to my mechanic he tried new ox sensor no change ended up putting electrical tape in front of the MAP to get in emissions test but shortly there after the light came on. So here I go again, this time ordering a MAF from Acdelco thinking the other new maf was not calibrated to this...

Not quite (all done) there is some bubbling of paint along the trunk, and bottom of rear window I have tried to touch them up but its going need a pro for this. I installed an after market radio as the oem did not accept the gps map disk and the 6 disk CD changer would not play I will eventually...

I have gone completly though everything from filters to throttle body, rubber connections, fuel injector seals, plenum seals and retorqed. None of that corrected the problem. After $800.00 my mechanic used some electrical tape on the MAF screen to get the codes to respond. He reported to me has...

I tried that and ended up buying a new cable from you! Ha,HA! btw I will be picking up the old cable from Danny and send it to you if you still need it.

Well have had plenty to time waiting for the new ecm and have been surfing for answers. I found from the GM tds site: Cars 2007 and later have no GDS support in fact all 2009 are not supported, except the HHR all others are tech2 tech2win. * source acdelco tds resource tab. Forgive me if you...

Someone asked about the VCX NANO; I haven't had my car back to test it on the car, but I finally got the software to load the trick is to go to the Java site and use that first then load from allscanners site for the most receint software. Next week will be testing on the car if and that is a...

This is becoming one of the most problem related issues, I have change everything related to intake air. Had my mechanice attempt to reflash the ecm and bricked it. Unless I have a cracked plenum that would be the only place I would have a leak. If the new ecm corrected (or not) I am going to...

I think it is the left side roof lift cylinder, been focusing on getting this car thru emmissions first then will respond the the lift cylinders. I have been removing old oil and refilling with new to cycle out the old stuff.

I dont know what the ride is suppost to feel like but some dip in the road I hit my head on the head liner. I acually feel like the wheels leave the ground

I should do a better job at my postings especally if one would want to use the service that I am writting about. The company is Legends (I before E except after C) anyway I flunked english more than once! I do not have any rating yet as the only thing fixed was my top now works if I keep adding...

I would love to get to the fluid change level, spent the last 3 months just trying to keep the car going forward (shift cable) and lean codes hydralic leaks; been to Legions now this will be the 3rd time let's see that is equal to how long I have owned this gem and now have a "bricked" pcm/ecm (...

Well latests update my mechanic called to let me know the ecm has bricked while trying to reflash ummm I suspected there was something wrong with it to start with. Being suspect I had ordered last week a reflashed latests program from online retailer along with my Vin number. Fingers crossed...

We hang in there we are all in a learning curve and somthing tell's me this will be an ongoing learning lesson. I suppose I should be upset but one of the reason I bought this car is something to work on, polish the rims, clean up the interior, make the head light lenses clear clay bar and...

I bought the car thru Ebay and did not have a chance to drive it had it shipped to me; the first problem was the top no op after a few demostration to friends and neigbors. Took the car for a shake down run and first emission test when the engine light came on that was when I strated to run...

Okay the codes started just after I bought the car (Ebay) guy swore it could pass emissions where he lived did not test, So took it to an XLR expert (top issues) told me to replace the throttle body, another person said retorqe the plenum so started from the front air filters, then the new MAF...