Search results

The cupholder lid if still hinged on both sides just needs a latch to repair it. I have them. 20$ shipped. Fairly easy fix

Ok im reading top is down as in open and stored. the center latch should not be reading at that point . the switch in the windshield headder where the pin drops down also should not be reading when the top is open but is known to turn the light on if bad and the top is closed. And as you said...

Might check that none of the potentiometer s are loose. Theycould have the drive pin worn. Read the values of them with the scanner and write it down check it to see if it changes. The secure light can come on for any of them being bad but not usually when its down only when its latched.

Syep thats him. I sent the parts an the first customer to him 5-6 years ago and he does any of my cuztomers that i cannot get down to. I work the gulf coast. Im sure if he needs anything he will reach out to me.

Is he at strickly saabs. Thats who i suggested months ago. I just checked and that is who i use but you had said it was too far. Glad youfound him. Hes verygood and honest i reccomend him to snyone in florida

Just pm him the vin. Anyone actually interested is going to do a quick car fax before going further. If anyone needs it i most likely have it

Who did you find. Pm me. Ive got potentiometer s at 1/3 ebays prices.

D3 has been gone for years. Its funny they claim to have made aboit 50 sets of headers but ive yet to see a car in person or for sale with aset on them. I do know of two owners that have them. you really need the power steering pulley to overdrive the supercharger to get any hp increase in the...

Good job. Thats a lot of work.to late to rrcommend but i sand the spring where the rubber meets the spring to make sure its smooth. Plus add a touchnof silicone grease to the rubber. Not much.. Ive used the kent tool to adjust the heights as its really simple to release pressur so you can turn...

They are a pretty robust unit withvery few failures. Plus being water ooled no one wants to rebuild them. Id check with j and j in marshslville ohio. If they have a good us one they will stand behind it. If they dont, i most likely have one at xlrparts@yahoo.com

Now thats a lot of wood. To light for my taste

Im not sure if the numbers are on the rack from the factory. Gm can change a number due to a redesign or they will sometimes change if they change manufacture. If anyone looks at oemcats its a good source for part numbers and what they superceed to. Also they tell the size and weight of the...

iVe got information from texas . they do not repair the magna steer. They can rebuild the rack with seals and boots and i believe new tir rods. But our ars have at least three racks and they are not interchangeable. They referred me to a guy in michigan. He does rebuid part of the magnates...

Bill what brand did you get. New ones will hold the trunk open. In fact you have to pull a bit on it to get it to close. You nay have gotten bad struts but ive done maybe 30-40 and thats never been an issue. Now if the pump is running and closing the trunk thats another issue

Ok that type material is very brittle and does not have any uv protection so you will need to add a suitable uv coating such as ceracoat. I applaud your efforts and feel this would be an option for a broken or missing lens. Id like to see you show one installed compared to a factory light. On...

You need to check because most plastics that can be shaped do not have any uv protection. It looks like you gave made them different than the factory. You might want to make video installing them. I sort of see what you tried to do but most people will be lost on installing them Im trying to get...

Hey i was talking with danny at luxury auto and mentioned this. He said he was not sure right off the top of his head but thought at rest level they were supposed to read 2.5 he said he does not remember useing the tech two to set them but just does a battery hard reset. Thats disconnecting the...

Thanks fir the information. Now if we can find a way to see if the shocks are actually responding to the voltage change. yours seems to be close to the middle of the range i would have thought a wider range but you said you are only moving it a bit. If any movement down lowers the voltage i...

Checking the ohms i do no believe confirms its working. Also check to see if its grounded to the housing. I saw a toyota unit video where neg volts was applied plus positve , i think 5 max in that case the rack was in a jig with springs pushing on the tie rod towards the rack.the torque to turn...

Id bet that no rebuilder that sells them for 400-600$ does anything but clean them up and put seals and boots. The one problem i see is that most list one rack for all cars. The 07-08 are not tge same as 04-06/07 middle year change. The gm part numbers so upgrades but that those two numbers do...