david12601
Member
hello all, I was adjusting pressure in system once the system was in spec I took off the low side connector and it didnt seal I put the fill fitting back on .....seems like the schrader valve is gone.....anyone experience this.......I ordered a new service valve and it turns out that it was for the high side ......I took the schrade out and used a schrader tool to try and install it ......it would not fit
I left the fixture from the gage set attached to the low side ......ac works fine but I would like to fix this
I left the fixture from the gage set attached to the low side ......ac works fine but I would like to fix this