Search results

Welcome to the club

Yes I believe so, check Rock auto the price may be different but there are choices that are cheaper.

I agree with Gord, check all your wire connections, that could be your problem. You should be able to program the keys by inserting the FOB into the slot in the glove box on the left side and following the directions in the manual.

I sent you a PM

I suspected as much. You're right about not needing to change it, after doing the calculation I found the difference is negligible so it really isn't necessary. Thank you

Has anyone used the Tech2 to calibrate the speedometer when switching to different size tires? It's may not be necessary since I am only changing the diameter a very small amount but I would still like to see if it is possible. I have yet to find a way to do this but I am still learning my way...

From everything I've read it sounds like that deck lid is very heavy so make sure you have help and/or support to hold it wide open before you start.

I'm no expert but it does sound like the struts are bad, I would start there. That may solve your problem and it's not difficult or expensive. Good luck

I once had the trunk open and then I put the top down from the trunk open position and had no problem, but I never tried it the other way. I don't have any answers but I think a power top relearn with a Tech2 may solve the problem.

That sounds about right, I know the center piece is about that. I'm not sure of the length maybe about 12-14 inches as they appears to connect to the center piece as I see there is a hole in the ends of the center piece. There must be a flange on the top also for mounting. I may be interested if...

The site you are looking at lists the price at $250 plus $28 for the card, plus $65 for shipping and if they charge tax you're over $350.

It looks just like the one I bought with all the same pieces and parts, from a different company, I paid $312 delivered and it works fine.

That's useful info, thanks

You're welcome Good luck on the repairs, hopefully it's just the rear cable bushing. That's the easier one to replace, you can see it just in front of the trans when you look up between the exhaust pipes. You can easily reach up an shift the trans into park from there also.

There is a leaver just above the floor light by the emergency brake, hard to see unless you remove the cover plate but if you reach your finger up just past the light you will find it. I don't know for sure but I think that will release the brake. Safety first, good luck.

No problems at all, it has worked from day one.

I have a 2007 V with XM and it works great and no antenna on the trunk.

I have the Tech2 and I'm still learning it's capabilities but it seems to do everything I have needed and has already saved me money. I tried a scanner made by Xtool, do not buy that one. Not only did it not work for the XLR, it caused problems that I was able to fix with the Tech2.

Welcome to the club and congratulations on your new car purchase.

Have you got it out of park yet?