Welcome to the Cadillac XLR Forums!

Latest activity

  • J
    Jan Smith posted a comment on the media item 2009 Cadillac XLR-V - Black Cherry Metallic.
    Awesome.. I have a 2009 XLR in Black Cherry with Cashmere Int. 1 of 47
  • J
    Jan Smith reacted to Rob's media 2009 Cadillac XLR-V - Black Cherry Metallic with Like Like.
    This is a 2009 Cadillac XLR-V, Black Cherry Metallic with two-tone Cashmere Ebony interior. This is 1 of 1 built and serial number 103.
    2009 Cadillac XLR-V - Black Cherry Metallic
  • L
    luxuryrules replied to the thread Bose amp wiring.
    I think that’s the 24 wire connector, correct?
    • IMG_1152.jpeg
    • IMG_1150.jpeg
  • M
    mickeytee replied to the thread Bose amp wiring.
    Is the amp in the front floor board or in the trunk?
  • P
    pjfr replied to the thread Bose amp wiring.
    2005
  • L
    luxuryrules replied to the thread Bose amp wiring.
    Not sure if it matters, but just in case it does, what year is your car?
  • P
    I pulled my amp out because it got wet and I now have 2 wires from the harness that need a home. Anyone know what the order is? They are...
    • 1000002332.jpg
  • B
    beyerch replied to the thread Hard top adjustment.
    I'll take a look; however, in my case it looks like the hard top is sitting too high and because of that the center portion of the...
  • L
    luxuryrules replied to the thread Hard top adjustment.
    I had a similar symptom with one of those covers not aligning well and the timing being a little off. Double check the mechanisms...
  • B
    beyerch replied to the thread Hard top adjustment.
    Perhaps this may be related. The adjustment mentioned here would move the panel back which should free up some space at the front...
    • 1749103032148.png
  • B
    beyerch replied to the thread Help! Need a top module.
    I've dyed the carpets already and they came out decent. Going to paint the plastic trim w/ SEM products and most likely doing that...
  • justdennis
    justdennis replied to the thread Help! Need a top module.
    I wasn't sure if Top Hydraulics just repaired pieces and parts or if they did the installs as well. If they do they may have seen this...
  • B
    beyerch replied to the thread Help! Need a top module.
    Not sure if that was a reply to me or OP, but in my case pump and cylinders are all from Top Hydraulics. Issue isn't related to either...
  • justdennis
    justdennis replied to the thread Help! Need a top module.
    Here's a thought, contact any company that works on these units and ask if they have any suggestions. Top Hydraulics is one such...
  • B
    beyerch replied to the thread Help! Need a top module.
    I've reassembled my pump, cylinders, reworked wiring and am looking to test module(s) ASAP. Work has had me traveling quite a bit...
Back
Top Bottom