Help! Ride hight simulators

[ESATONICK]

I have a 06 XLR want to by pass ride hight sensors. I bought a few but they wont plug in. Anyone know what simulators i need that are plug and play to factory harness

 

[richardyoo]

To clarify - are you really refearring to "ride height"? or are you talking about "mag ride"?

Posting a photo may be helpful

 

[ESATONICK]

To clarify - are you really refearring to "ride height"? or are you talking about "mag ride"?

Posting a photo may be helpful

Ride hight sensor the two on the rear not the shock

 

[lextoy]

I did this 2 years ago. I had problems with the Casper simulators constantly burning out. So I used these much bigger resistors from Amazon. Note you need the kit with all 8 simulators, not the 4 piece kit. Reach out to this guy on Amazon. He was cool and helped me get the right parts. Fitment was perfect. Note on 4 of the plugs I had to trim the plastic divider out. After that I taped all plugs together anyway for security and waterproof. Then I found a good place to zip tie the plugs out of the way where the wires won't get pinched or rubbed or pulled. Took a little time, but came out great.
This is the exact 4 plug kit I got. But you need the full 8 plug kit. I only got 4 as the casper plugs for the ride height simulators were not burning up so I had those already. I left a detailed review on Amazon with pics if I recall. And I'm sure I posted the same thing here.

https://www.amazon.com/gp/aw/d/B09R9D3S7G?psc=1&ref=ppx_pop_mob_b_asin_title

 

[lextoy]

This thread goes into way too much detail. Lol. But it was my experience and it worked out well.

Post in thread '"Service Ride Control" ??'

Aug 4, 2024

Update, after getting a Chinese tech 2 to scan codes and check the suspension system, found that 3 of the 4 Casper resistors for the struts were fried. That happened when they only installed those 4, and not the ride height sensor resistors. (Original shop did that) We saw with the tech2 while driving, zero change in the 3 locations for voltage % reading for the struts, while one was modulating from 0 to 30%. The dead strut readings were the ones throwing the codes. The 4 ride height sensors were reading a steady 2.24 v, and no codes. Caspers was great and mailed me a new set of 4 gray...

• lextoy