Search results

I like it, I t will be interesting to see if your engine temps also drop down a bit. are you going tp paint it car color/ I saw a photo of an xlr with two small ones almost just like 1/2 of that mounted on either rear side of the hood.. I bet it was that vent split in two.

no just clean it good wit ha water based solvent. If your are down to the raw material I would use a product like bulldog to spray the plastic a for adhesive promotion. than a coat of primer .the less material build up the better. The base coats today most all have a flex additive. then a...

you have to take the back of the door off to get t othe nut that removes the latch. That nut and o ring hold it together. But some of the doors back covers are not only clipped together but glued. I posted photos o nhere before of where the two parts are attached so you can break them apart...

on price is right , I always bid "ONE DOLLAR" hardly ever over but am too low a lot

if a little lube sprayed into the latch while it is out does not fix it , let me know on you other post.

steve you will have to get a complete used lid the latch is not sold and the lids are around 100$ when you can find one. If its black send me a private message and I may be able to repair yours

he is in saudi arabia. I have kits for the hoses but shipping would be to expensive to ship there.

they are aluminum split rivets on most models .If you just take some side cutters to the split part and snip the mand then pull out the reamining part of the rivet its easy. The bumper is supposed to actually snap out from the fender bracket and leave the retainer In place but they are put on...

I don't think you can just replace two shocks with non mag? That's a new one for me. We do all 4 but the module has to be working to turn off the safety system speed limiter.

the mass air flow is just held on with the hose clamp on either side of the rubber intake hose. Take one hose off the throttle body and one off the intake breather assembly and unplug the wire.

ok. I normally have the lights out if replacing it but I am 90% sure you don't have to. just pull the grill with the bumper to make the grill easier to come off . I will look In j ust a bit on one that is off to make sure there are no clips on the top of the bumper under the headlight.

no way to turn off light and no one to repair it. I had a customer find on for 850 and I have tried to contact the seller to buy it as they usually cost 1500 for the module. Will let you know if I can get it for you. People tha tread this, if you are going to replace your shocks with mag ride...

you list you have a 2009 but ask about the 08? they are mounted different

the power steering pump is a little hard to get to. You have to remove the pulley to get to the bolts that hold it on. Be sure to use the right puller to not damage the pully. You can get one at autozone to borrow should you decide to do the job. I will send you the right number if you do it...

I use ppg as I get a good deal. People do not realize that he doors being smc grow the same in all directions when it gets warm. the fenders and 1/4 panels grow front to rear . that's why a door gap may get bigger or smaller in the heat. That's also why the fender and 1/4 bolts even thought tiny...

Beaver that is exactly why I sell parts at what they are worth. I have paid it forward all my life and will drive 100 miles to give someone something they need before I throw it away.. I actually used to sell parts at a great discount to forum members and have loaned headlights and taillights...

So I read this to mean that someone is going to help out a fellow member with a taillight for no charge because that is the thing to do. Used parts centers that sell parts invest hundreds of thousands to buy parts and make a profit. The market has always on anything set the value. Too high...

wet you a rag and wipe the fenders in that area. Not all had that wave as they are molded plastic but some did Eastwood makes a good paint .The base is much less important with an overall paint job. I might cut corners on base when doing an all over and not worried about a match ( be sure to...

an 06 and 07 with that low miles ought to bring a good price. Shame they did not drive them more as I doubt the same car with 10K miles would bring any more money. That's bunch of cars for one auction.

are you talking about the one on the headlight washers? if so we just discussed this a few weeks ago wit ha lit of prices. I will send you a link if that is the one you need