Welcome to the Cadillac XLR Forums!

Search results

  1. justdennis

    Serial and registry update?

    Go to registry, pull up your car by year and vin number, click on "profile", then in the header bar there is a place to "update this XLR". Click on that, I believe that's how you do it, but it may have to be approved by the site administrator once your done. I think that's right but I'm going...
  2. justdennis

    Yes, body control, driver position module, special functions, column calibration. That worked...

    Yes, body control, driver position module, special functions, column calibration. That worked for me, good luck.
  3. justdennis

    I purchased a Tech 2 and did a column calibration and that solved the problem. It's been...

    I purchased a Tech 2 and did a column calibration and that solved the problem. It's been working fine ever since. I'm not sure you have the same problem, mine stopped working altogether when I used the xtool. It's not a good choice for our cars. The Tech 2 is worth a try, I'm no expert with it...
  4. justdennis

    Change tire size

    I have a 2007 V, I left the front stock at 235/45-19 and increased the rear to 265/40-19. The stock rear was 255/40-19 so the change was small but it filled up the wheel well a little bit better and didn't effect the speedometer enough to worry about.
  5. justdennis

    FrankenXLR!

    Thanks, I had not seen this one. That is wild!
  6. justdennis

    2006 XLR-V Pop in left front when changing elevation

    I agree with Mickeytee. If they changed the spring they either installed new ride height adjuster bolts or moved the old ones over to the new spring. Those adjuster bolts are the main reason you would change the spring because they either brake or wear down and get frozen into the spring. Check...
  7. justdennis

    2007 XLR-V Exhaust Module

    I fixed mine by changing the Solenoid. Good luck.
  8. justdennis

    New member from Finland

    Hello and Merry Christmas, I like your style. I live in Florida and drive mine year round, but when it's too hot I leave the top up and turn up the AC.
  9. justdennis

    Lower bumper breakaway shield ???

    Yes you can, that's what I do. At least until I find some at a reasonable price.
  10. justdennis

    tech 2

    Google "GM Tech 2 scanner" and you will learn all about it. The original GM Tech 2 is too expensive so everyone buys the clones made in China. The cost is about $300.
  11. justdennis

    New member from Viera Florida

    Welcome, enjoy the ride.
  12. justdennis

    Necessary preventative scheduled maintenance.

    The axle nut is on the end of the axle, you need to remove the rear wheels and the nut is there at the end of the axle. It is a 33mm nut and the torque spec is 151 but verify that, my memory may be off.
  13. justdennis

    Looking for Driver's Side Front Air Dam or Spoiler for 2006 XLR-V

    I don't think they are the same, they are not as wide (up and down) and are made to conform to the corvette's rounder front end, the center piece may be the same. I'm not 100% sure but if you haven't ordered them yet I would do a little more research.
  14. justdennis

    2nd place

    Well done
  15. justdennis

    Rear wheel bearing replacement

    I agree, and that would have been easy to do.
  16. justdennis

    Rear wheel bearing replacement

    A few weeks ago I started noticing a new and different noise as I was cruising above parking lot speed, kind of like a growling sound. It sounded like a bearing in the rear but to be sure I jacked up the front end and spun the wheels and they sounded and felt fine. As rear wheel bearings are...
  17. justdennis

    LC3 rabbit hole

    That all sounds logical, thanks for the clarification. Does anyone make headers for the V and can you eliminate the cat's, and would you want to?
  18. justdennis

    Faulty temperature readings

    I didn't know ambient air temperature was on the DIC, on my car it is on the radio display next to the time.
  19. justdennis

    Faulty temperature readings

    I just had the same thing happen to my car last week, code P0128, (temperature to low). I changed the thermostat and so far no more problems. I have only driven it a few times since but I think the thermostat being stuck open was the cause.
  20. justdennis

    Oil leak

    Good for you. What is in this magic elixir, and is there a cheaper alternative I wonder.
Back
Top Bottom