Search results

Yes, to be 100% clear, I'm not implying anyone here did it. I got the car from Florida sight unseen w/ a known top issue & just reporting what I found. Given the Rear Tonneau counts I was seeing on the Tech II, I theorized the readings were 180o of what you would expect and I was planning...

FYI - Trunk operates as expected now and was able to trigger the top learn process. Two main problems (after all the other sh*t I've already worked through ) - Battery voltage must have been run down as I started seeing phantom DTCs and battery too weak, couldn't even turn over the starter...

Did you ever figure this out? I have a VERY similar situation right now. If I ....... * Use the Key Fobt, lights will flash but nothing happens, nor do I hear any sign of activity in the trunk area. * If I press the button by the license plate, I hear BCM click, but absolutely nothing...

I know it's an old post, but did you still have radio / metra parts?

Mine *seems* to work, but I'm gutting my car to track down some issues and convert the interior and the exterior of the amp looks pretty rough and I can see some corrosion on some of the circuit board. Seems like now is a good time to replace it while I have everything apart anyway. My radio...

Interesting. Amp probably sends a periodic message to ACC (or vice versa) If sniffed out the message(s), could just make a simulator to send these messages and eliminate it altogether. On a side note, anyone have an AMP they don't need?

I'll take a look; however, in my case it looks like the hard top is sitting too high and because of that the center portion of the tonneau makes physical contact with it when you try to put that part down. (I'm just manually opening and closing at this point, thankfully) Going to try the...

Perhaps this may be related. The adjustment mentioned here would move the panel back which should free up some space at the front, going to find out tomorrow when I take a look.

I've dyed the carpets already and they came out decent. Going to paint the plastic trim w/ SEM products and most likely doing that today. If it doesn't turn out very good, then I'll just go and buy the pieces in black; however, the prices people are asking for simple plastic trim on-line is...

Not sure if that was a reply to me or OP, but in my case pump and cylinders are all from Top Hydraulics. Issue isn't related to either as it does this with all the hydraulics out of the way when manually opening the top. Seems like something needs to be adjusted. Ironically someone else...

I've reassembled my pump, cylinders, reworked wiring and am looking to test module(s) ASAP. Work has had me traveling quite a bit lately and other stuff going on. Right now I'm trying to troubleshoot an issue with my top before I try to operate it and damage something. The tonneau is making...

Ironically, I seem to have this EXACT problem. If you find a solution, please let me know. (and if I figure it out, I'll let you know as well)