Search results

See my post (#5) in this thread for a possible fix: Trouble shifting out of park. CC :wave:

Inspect the leading edge of your Folding Top ASAP! Roof panel detached while driving Your driver door switch may need to be replaced. (The car is twelve years old after all. . . ) CC :wave:

Here's another headlamp washer nozzle source ($38 ea.) with multiple color options: 2004 - Cadillac XLR Parts - SMC Performance and Auto Parts CC :wave:

Ahhh. . . That explains why I couldn't locate it: The second part number is different. 89047699 is for a Brake Pedal Position Sensor. Yours may have been stuck to the ON position. If the cruise control thinks the brake is applied, it disables.

Do you know what the name of the sensor is? That part number doesn't list anything when entered into the GM parts database. CC

The easiest problem to fix would be if the bezel covering the radar module is obscured. It's the driver's side plastic smoke-colored cover. The passenger side cover is cosmetic only. Remove the cover by pinching the sides and pulling forward. Another possibility is the switch is bad (least...

The engine cooling fan is controlled by the ECM (Engine Control Module) through several sensor inputs. It will command the fan to run at variable speeds depending on what it perceives is the right amount of cooling required. The fan will be commanded to the ON state when the following...

Thought not specifically mentioned, he may be referring to the electric engine cooling fan instead of the HVAC afterblow feature you've enabled. CC

I'll take a look in the books tonight for something sensor-related and add to this if I have anything useful to contribute as to why the fan is running for extended periods. CC :wave:

It could be :wave:one of the header latch hydraulic cylinders is leaking, preventing proper operation of the header latch itself. CCC

A mystery hydraulic leak can get very expensive if allowed to continue. The absolute worst place to have it leak is (as mentioned) under the headliner. It will soak it up for awhile, and then . . . If allowed to come into contact with some of the other materials in the car, it can damage them...

One factor at play here is TIME. The '04's and '05's exhibited the crazing issue early on. GM's fix with '06 and subsequent years doesn't sound like it was fool-proof. Until recently, I haven't heard of later years having this problem, but with the passage of time, it makes sense for some...

Salvage yards and online sites like eBay are your best bet for discontinued parts. CCC :wave:

Need pictures of the headlight and interior of where it resides to even begin to make a call as to if it's repairable.

The temp on your bezels isn't the only factor involved with this repair holding up. I work with a lot of adhesives and two important factors are cure time and the environment the bond joint will be exposed to (temp, pressure, humidity, etc,) As a general guide, (since I don't know what brand...

I'm not sure how my statement was interpreted. Crazing of the DRLs was flagged up to some of the 2006 model years when a fix with a more heat-resistant bezel was introduced for the 04-06 model years that needed to be fixed. By then, the 06's had Adaptive headlights, which electrically were...

Good to hear it was a firmware issue and the hardware is okay. I think the reason for the problematic weekend comes down to one simple thing- not enough beer to continue troubleshooting. . . CC :wave:

As long as the repair restored it to like-new condition, you shouldn't take a price hit on it. A minor ATM bump that creases the hood isn't the same as being rear-ended at a light where structural damage is likely. Current 2004 XLR prices are higher than any Cadillac built in 2004 of any...

The fix was implemented during the 2006 MY. Not all 2006's have it installed. It took time for the problem to become obvious on the 2004's before a revised part could be designed/built and fielded.

I don't think one crazed bezel should be a deal-breaker, but. . . if it bothers you now, it would probably bother you more later on. That being said, there are hundreds of XLRs on the road with this same issue. You can avoid it by finding a later model (2006 and up) that sported the improved...