Welcome to the Cadillac XLR Forums!

Search results

  1. RDwilkerson

    Looking for the latest Western US Navigation Disc

    I also put a new audio but did not like the black Metra frame took out the aftermarket and found a SRX radio and 6 disk kept the audio and replaced the gps and 6 disk bought a BT-45 vette now have bluetooth and still OEM, Used the after market in my 05 dodge dakota. As far as up dated maps you...
  2. RDwilkerson

    Tire Pressure sensors

    I just install all 4 wheels with new sensors, left front sensor battery was 1.5 volts after removing the old sensor should be 3v. It is a liitle work installing the tpms number 25758220 That is the GM part number OEM price for 1 is well over $100 I purchased mine at Amazon $32.99 all 4 and are...
  3. RDwilkerson

    Trunk sinks closed after opening

    No need for a tool if you remove the limit secrew on the left trunk sizzers you can lift the lid high enought to install the struts I did it my self small torq head screw be sure to reinstall after the struts a completed
  4. RDwilkerson

    Turn signal led conversions

    Well awhile back changed out all the front to leds, I made some heat sheilds from brass plate and mouted the resisters for the turn signals. (first picture) then since I have so much time was surfing the net and stumbled up a better resister sistem :4 LED TURN SIGNAL HYPERFLASH FIX. why was I...
  5. RDwilkerson

    Separating headlight lens from headlight

    Okay I just removed the old lense I had warped with my buffer. The only way I could get it loose was the oven temp a 245 10-20 minutes. If planing to reuse the lense (say DIR lense removal) you need to under stand this. Remove rubber seal around the outer edge behind that, is a gray outer edge...
  6. RDwilkerson

    car wont go into gear, shifter just floats back and forth from park to drive..and doesnt engage!!

    You might be better off buying a used tranny if it's slipping the shift bushing only apply to the shift process and not slipping.
  7. RDwilkerson

    "Service Ride Control" ??

    The reason why the 04-05 suspension module are different is that there are 3 input connectors instead of two. So the data going to the computer see the information provided by the posistion sensors and abs to send a voltage to charge the mag power (slurry) to make the shock ether firm or soft...
  8. RDwilkerson

    "Service Ride Control" ??

    Just did a price run on all the lowest price sources as follows: Rockauto: Mag shocks with shipping to AZ $1788.80 OEM Amazon: Bilstiens set might have a ship charge $570.46 stiff Amazon C6 Z06 front and rear $541.91 Winner! Delco and are black! Casper sims: $184.94 I hope this helps those who...
  9. RDwilkerson

    The Saga of owning an XLR.

    Well the 05 I bought had 10700 miles on it the problems new mirror, radio, disk player, gps no emergency key, new dash, passinger tail light, bubbling paint at rear window and trunk spent 3 days getting the headlight to clear up, drl lenses burnt. Let's not get into the lean codes or emission...
  10. RDwilkerson

    "Service Ride Control" ??

    Thanks that will give some direction to head towards. So the GM vette shocks are a better choice, might price them out also. I have no issue with replacing all the mag shock if it would smooth out the bumps better, but still on the line as what is the best action to take (save money or expect a...
  11. RDwilkerson

    "Service Ride Control" ??

    Okay there is quite a bit of information on the suspension module but I need to know some particulars in example what should be the working volts as tech2 records. I get no dic's and voltage varies somewhere in the 3.4 volts at all 4 wheels and will change slightly when I sit on the trunk and...
  12. RDwilkerson

    Help! Won't start

    I decieded to simply pull the injectors and rail set aside and retorqe the manifold (just to be sure I also replace all the gaskets)
  13. RDwilkerson

    Upper shift cable connection linkage bushing repair

    I tried it and had to get a new one from this guy, trust me on this he has the best price.
  14. RDwilkerson

    Code P0174 "System Too Lean"

    The air diffuser get crushed by the rubber connector when installing you must connect to the diffuser first then to the throttle body the angle will deform the air diffuser. I had the same condition on mine mainly because the MAF was wrong and to long making it diffuclt to make the connection...
  15. RDwilkerson

    Power Steering Units repair/replace

    Just another GM brain storm how hard could it be to engineer universal parts? A person could go mad fishing thru all those part numbers seems so dam easy just to produce the same part for all it's cars.
  16. RDwilkerson

    Tests

    Use some cat cleaner
  17. RDwilkerson

    Code P0174 "System Too Lean"

    Gm part number is GM 12573350 if the maf is hard to install it is the wrong one.https://www.ebay.com/itm/353523614573?_trkparms=amclksrc%3DITM%26aid%3D1110006%26algo%3DHOMESPLICE.SIM%26ao%3D1%26asc%3D I had to break out the end where it attaches to the rubber seal at the diffuser just to remove...
  18. RDwilkerson

    Driver's Side Headlight Assembly For Sale

    I was thinking about doing the burnt lenses but not now!
  19. RDwilkerson

    Driver's Side Headlight Assembly For Sale

    Address: 15500 Voss Rd Unit CPA22+, Sugar Land, TX 77498, USA Email: frankolvera114@gmail.com Phone: (832) 939-7925 I don't know if this helps
Back
Top Bottom