Search results

Welcome Dale [emoji16] Sent from my iPhone using Tapatalk

I'm in Sent from my iPhone using Tapatalk

Much smoother ride Sent from my iPhone using Tapatalk

I run continental non run flats as well and I have them set at 26psi cold with no alerts. Mine alerts @ 24 psi "Low Tire" Sent from my iPhone using Tapatalk

I looked at the slides closer and the information is there. I just didn't see it , sorry for the confusion Sent from my iPhone using Tapatalk

On the slide where it says CD changer 2 there is the last line missing telling you how to connect two wires. I will get that slide to you in it's entirety Sent from my iPhone using Tapatalk

This wiring is to use the factory Bose amp so you would use the the speaker leads from the head unit that connect to the GMOS-06. Not the low level RCA leads Sent from my iPhone using Tapatalk

Sorry I left out 2 important slides Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

It's really good to see that there are options available for upgrades on audio for the XLR [emoji1303][emoji847][emoji41] Sent from my iPhone using Tapatalk

Local mechanic can fix this Sent from my iPhone using Tapatalk

The sensor was good , was the connector that was loose so I removed it from the sensor cleaned it with contact cleaner then re-installed it making sure it was secure. Problem solved Sent from my iPhone using Tapatalk

Well after having the ECM flashed at the dealership and reinstalled the OEM filters the DTC P1101 code has not come back[emoji4] Sent from my iPhone using Tapatalk

I had experienced the same problem just after purchasing mine. The coolant temp sensor wiring at the sensor had a bad connection, once that was corrected haven't had that problem since. BTW the coolant temp sensor on the 4.4 sc is located at the aft side of the head. Right Hand side (passenger...

If the DTC P1101 code is still there I was told the TP Sensor is adjustable. I will post of my progress later this week[emoji1303] Sent from my iPhone using Tapatalk

So far I have checked or replaced SC inlet pressure sensor, SC outlet pressure sensor, Barometric pressure sensor. The TP sensor measurement is marginally just outside of parameters at 4 (2-3 is the range) I'm re-flashing the ECM at the dealership with the current parameters this week Sent...

These K&N filters are brand new out of the box installed. I will investigate that possibility but the DTC P1101 code started before these were installed. When I replaced the MAF sensor I also replaced the OEM AC-DELCO air filters at the same time. Sent from my iPhone using Tapatalk

Stock air intake Sent from my iPhone using Tapatalk

2006 XLR-V Sent from my iPhone using Tapatalk

I have run down the list of possible causes for this induction imbalance and replaced mass airflow sensor , air filters , bypass valve and checked for vacuum leaks to no success. I'll reset code sometimes it takes a couple of days to trip the code and other times just a few hours. Anybody have...