Search results

Hello - bonjour! I believe the pdf attached to the referenced thread would be what you need. https://www.xlr-net.com/forums/threads/best-coolant-to-add.12775/ HTH! Gord

I don't believe that's quite accurate - re the mirrors not folding in and just lowering. I've done the conversion and it's lengthy adding the switch panel along with circuits in to both door modules and even relays and wiring in to the Body Control Module. The construction of the folding sort...

Howdy! That appears to be a later issue Cadillac fob - maybe originally for a STS or such. If you do a Google search for '2005 Cadillac XLR Key fob', you'll see what originally came with the car: marked XLR and lacking a button. HTH! Gord

Hi Hal, Try 22751230 which best as I can see is the exterior switch used on pretty much everything and available all over the place (web) as well. Least expensive I've seen is from my side of the fence: https://www.amazon.ca/Genuine-22751230-Release-Switch-Exterior/dp/B00GTJVMAI @ $27.17 and...

Attached PDF file for your reading pleasure. :) As I recall, they asked for some specific puller extensions - I got 'em prior to loosening the nut. And when I did loosen the nut, the wheel slid off by hand with no effort at all. Maybe loosen the nut first before just to check if you -really-...

Have a look at this post: An XLR video I've not seen before .......... ... which shows the assembly of the car at the factory. You may pick up some clues as to how it's handled if just a little. HTH! Gord

Morning Andy, It does seem the 04 / 05 did not have said module. Wiring diagrams attached. Gord ;)

Pretty good read here regarding the color significance: https://fuelandfriction.com/weekend-warrior/the-different-colors-of-coolant/ Well, the coolant level certainly has to be adequate, after that, best look around for leaks. I've had coolant tank levels drop for no reason (in my opinion) so...

"Use a 50/50 mixture of DEX-COOL antifreeze and clean drinkable water." 14.8 quarts / 14 liters as per attached PDF file. HTH! Gord

Not really a solid reply but the previous owner of my XLR did have to change out the valve cover gaskets - the resulting leak(s) ran down the side of the engine quite badly and made quite a mess. Just time, heat and age I guess. I can't tell much from the pictures, sorry, and that's the only...

Morning Tom - you are welcome. I didn't read it all but here's the 'cooling' section which has some blurb on refilling around page 37. I'd read it over to size things up first before truly panicking about really having to have anything super special to get the job done. HTH! Gord

Hi Tom, Single page attached PDF file showing the location. Sorry, I don't seem to have the full 'how to' available via PDF and it doesn't look to be an exactly fun spot to have to play in. Then again, maybe there's just enough space... at least now you'll know where to look. HTH! Gord

Hi Steve, There are 2 file attachments on the second post in this 'thread' (conversation). https://www.xlr-net.com/forums/threads/how-can-i-get-the-the-ac-compresser-out-to-replace-it.12766/post-91317 Those attachments are the instructions for removal and are 'PDF' (Portable Document Format)...

Morning Steve, Did you have a look at the PDF files? Around page 52 there's 'the procedure' and it's lengthy unfortunately. You'll have to drop the subframe (support the engine!) and all sorts of other stuff then remove the compressor through the right front wheel well. If you've seized the...

Hi Steve, Ouch. "The A/C compressor is removed through the RH front wheel house opening. It is necessary to lower the engine cradle assembly to allow adequate clearance during removal." :( All I have on HVAC attached. HTH! Gord

The whole panel - not a big job at all. HTH! Gord

Here you go. HTH! Gord

Howdy, Try here perhaps: https://www.westcoastcorvette.com/search?q=Ride%20Height%20Adjusting%20Bolts Alternate with no doubt, a somewhat stiffer ride: https://www.lingenfelter.com/mm5/merchant.mvc?Screen=PROD&Product_Code=L500010197#.ZFFN5nbMKM8 I wouldn't be too concerned about front /...

Hawaii - lovely! :) Pic attached and look closely. I'd say what you have is just fine. Note molded in to the bumper are wee corner bosses so as to set the pad with adhesive in the right place. I'd bet your adhesive just got tired from the wonderful Hawaiian heat and I really wouldn't be shy...

Hi Rob, My experience says they're identical with the mounting arrangement being the only difference and of course, it can be swapped to suit. I have seen cars where they -sprung- the driver's side a little different than the pax side, can't say I've encountered stock shocks that were truly...