Search results

I was looking at prices and considering selling my 06 V, it has 40k miles and is all blacked out with the 09 front and rear, sinister looking. let me know if interested, I can shoot ya some pic's, need $43,

Do my symptoms seem as though I am on the right track

I should have mentioned that the electric fans come on as soon as you start the car as well, even on a cold start.

My car once before give an overheating message on the DIC but was confirmed to not be hot and the problem went away after the 2nd. restart. Now it has came back and is persistant. It cycle tests the gauge on startup and imeadiately tells me " engine hot, A/C off " I am thinking it needs a new...

I still have not reduced back down to 30 psi yet and mostly because I am seeing 6 psi increase when the tires warm up on these 75 degree days and I have not yet decided on a base pressure for cold based on driving after warm.

Ya we had the hail here in Madison Indiana also but that was about all we had right here. It was crazy we are about 5 to 8 miles from the town of Chelsea where so much damage occured, Lost 3 people out there and said to be 25-30 homes. We had plywood, insulation and pole barn metal just falling...

I mis-spoke about my first impression of the increase to 34 psi on my car as I drove it a couple of hundred miles today on a short trip and I can't wait to get it back to 30 psi. and make it enjoyable again. It wanted to bang off of every pebble in the road, it was just too tight and stiff.i in...

Ya, I am overdue on wanting to get that done and am driving the car today so I'll stop on the way home and get one, cr2032 ??? I kinda hate to pop it open to check at the store incase all does not go well.

That sounds like good advice, I'll order both tomorrow.

I have read some but still am in need of a little help. My driver door is internitent on letting me out with the push button interior switch about 50% of the time now, and getting worse, time to deal with it. It is also a little intermitent on the outside switch but to a lesser or maybe...

Swapped out the front spring this afternoon and started with the adjuster bolts most of the way in or " lowered " and it still raised the car about 3/4" so my sitting too low in the front issue is now under control. After test driving I think I want it back up within a 1/2" of stock, give or...

Tires are Continentals and ride and drive wonderful. The only dislike and it is minor is that they can have detectable flat spots for the first mile or so maximum, after sitting for several days. I did set them at 30 psi as suggested above and also just tried them at 34 and I think the 34 psi...

Thank you so much, was getting frustrated with looking all over for such a simple question. I was inside for a quick bite to eat and you answer came in just before I went back out to the shop to finish the front spring change......

My placard is smeared and illegible, I can't believe the manual refuses to say, at least that I can find. Tired of searching, Thanks, Doug... What tire pressure do you all find optimal on the 19" wheels

I had some clunking as well and now believe after through investigating that my rubber bushings on the bottom of the ride height adjuster bolts were either cut off or tore away from use and the bolt heads are working on the aluminum lower control arm and are being a little noisy. I think mine...

I'm glad this came up as I had read and intended to go back there and lube the lock cylinder and had forgotten that piece of intended maint. I also bought 2 new fobs and need to go through that fob not present procedure to assign them to #1 and #2

Well I give in and ordered a new front spring from the dealer today, if nothing else I'll have good adjuster bolts on each end and will surely fix it.

We I just got out from under the car doing a little studying and it has a factory GM front spring. Part# 22146483 with a 1-4 code also. I looked on line and this spring is commonly associated with base 99-04 corvettes, what does anyone think. I will get online and try to do some cross...

I am seriously thinking it has a lowering spring of some kind, I have been studying the pictures and part #'s of stock springs on ebay. Trying to identify mine as stock or not is my first coarse of action. With the factory adjusters in my spring there is not enough adjustment range to get even...

Some of you have heard me asking questions about ride height as my car sits very low in the front. I am going to whip this issue while it is down for a few days. I'm still not positive if it has a lowering spring or if someone has cut the rubbers on the bottom of the ride height adjusters...