Relearn...rexter

[josua]

I'm being a PITA. RExter, I read the relearn procedure, but not sure about it. When it says press soft key relearn do you keep that key plus the top switch on the console pressed until the top is completely down then release both buttons? When you put it up, do the same thing? Two separate things?

 

[redvett94]

relearn side windows

press the 2 switches to go down and hold for a couple of seconds and do the same going up. When done see if the express up/down works.

 

[rexster314]

First off, index both the windows. Once you've drilled down to the menu on the TECH II, press the "Learn" key, then cycle the top both ways. Disconnect the TECH II, and try out the top. Pat yourself on the back, you just saved about $150 bucks.