Dont buy the china mag shocks

[mickeytee]

Ok after looking into the china shocks im going to say it should be a hard pass. I am still working on it but they are not mag shocks as listed. They are actually a very cheap made shock with a built in simulator. So all you are getting is a shock with a bypass. For a little more you are better off to get the z06 upgrade not china but delco or the bilsteins and an external simulator. I will be doing a video on this to support my findings at this time

 

[robert.ogden2009]

Thank you for your info on this.

 

[Kennadian]

Hey There..... Still haven't done anything about the shocks. You seem to be a fan of the Bilsteins. Can you guide me to the correct part nos. for front and rear and the likely cost?

 

[MR Roadster]

BILSTEIN 24029766 for rear
BILSTEIN 24029759 for front.
You'll need a working suspension module and simulators
Or a suspension module bypass.

 

[Kennadian]

Thanks for the info, I’ll check them out. Are you also referring to the M&P USA GM Magna Ride sensors? Do you have any idea of the cost of the Bilsteins?

 

[mickeytee]

I use the casper simulators. About 200 us$ bilsteins are about 500-550 us$. Id look for a performane auto parts in canada and see what they have. I personally like the gm z06 upgrade. The z06 was a little firmer than stock corvette which helps make up the heavier xlr. Then z06 people wanted a little firmer than stock so a gm upgrade. They usually run a little less than the bilsteins