Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Thank you so much for your prompt reply. One of mine essentially disintegrated in my hand creating a gooey mess. The other one fell off and I tried to preserve it, thinking maybe I can make one somehow. Every site I look at lists them as discontinued. So everything you mentioned is what I have experienced. I wonder what will happen if I drive my car without them. Will it create a problem?not going to find any. They have been discontinued for a long time. They get soft and the rubber dissolves. People on the internet claim to have them and show them but no one has them i can guarantee. One member said he 3d printed some but never got back to show them or sell them so I doubt they worked.> I found another one that t would work years ago but I needed 15$ each for them as they need work to make them fit properly and people said I was ripping them off as the proper one listed for about 3$ when you could get them, so I dropped selling them. Hope you find something that will work and if you do please share as a bunch of XLR cars need them. If you go to remove them they will get all over you and the goo is very hard to get off your hands ,
Call and ask to speak to Shane at Elite auto parts located in Long Lake Minnesota . He should have what your looking forI am looking for GM part # 10346849. It is some type of rubber bumper stop.
Shane came through with two for me which he says look fairly good. He's shipping them today. I hope they're the right thing. Thanks for the help.Call and ask to speak to Shane at Elite auto parts located in Long Lake Minnesota . He should have what your looking for
Great. He is there 99% of the time to take your call and assist the XLR Owner looking for a part.Shane came through with two for me which he says look fairly good. He's shipping them today. I hope they're the right thing. Thanks for the help.
Hello Mickeytee. Hugh up here in cold Canada. Where exactly do I find these rubber pieces on my trunk ? I will then check mine and if I need them I will take the two you have if you give me a price and to ship to Canada. Thanks Hughhope you did better than me. I found a set new at a dealer and bought them .I did not notice until I got them they charged me 40$ freight and 20$ for the two. They said they had a flat freight charge >I told them I should have added a hood with the order so I got a deal on freight. If someone needs this pair I am open to offers or I will just use them one day
Thanks for the prompt reply. Just went out to garage and mine seem just fine. Do you put anything on them to keep them pliable or do you just cross your fingers and hope for the best ?yours may be ok . Open the trunk and they are underside at each corner near the bottom of the trunk. when you open and look next to the taillight you will see a metal bracket that is hidden by the trunk and has an oval hole in it. thats where the rubbers fit the body. If you just see a metal stud then the rubber is gone .It should have a 1/2 inch cone shaped rubber on them.
Hello Mickeydee. I would like to secure these two from you. It would require shipping up here to Canada. Will pay by VISA or Paypal or send you a check. You set the price. Let me know and thanks. Hugh Reidhope you did better than me. I found a set new at a dealer and bought them .I did not notice until I got them they charged me 40$ freight and 20$ for the two. They said they had a flat freight charge >I told them I should have added a hood with the order so I got a deal on freight. If someone needs this pair I am open to offers or I will just use them one day