Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Had the headlight assembly removed. Took the drl lens out. Replaced all the lights with LEDs Looks good. Happy camper now!
How is the DRL lens removed?
This is what BobbyT told me, and it worked for me although I did not need to have a body shop remove the headlights. "I had the body shop remove the headlight assembles. My DRL’s were cracked, yellow and brittle. I removed the light sockets and was able to pop the drl lenses into the the main housing. Took a pair of wire cutters and needle nose pliers to pull the broken pieces thru the socket hole. I attached a straw to a dry vac and sucked up the chips." With the light socket removed, you can push the lens out with a screwdriver and a little pressure. If your lenses are severely melted, they might even break into pieces when you try to push them out.
Good luck
Yesterday I did the same drl lens removal reported by BobbyT. I think it looks fine and others can now clearly see my daytime running lamps and turn signals. Took me about 45 minutes to do both sides.View attachment 9021
the headlight is really easy to remove . Just drop the front splash shield ,reach In and locate the 3 10mm nuts pointed straight up and then lift the light out. If you have one good lens It will be hard to break it up into small pieces to remove. I still like my replacement lens for the money and keeps the car looking proper.
What light bulbs does it take or these lights? Running light bulb ad turn signal light bulb. And I am not sure what bulb is the main headlight and how do you get it in?
Thanks,
Sally,
Can you open one of these headlight up and replace the DRL Lens? If so ,I need to have you fix my headlight and not use the 06 model with the scratched lens.
Thanks