do C6 vette cat-backs fit our cars?

[james04xlr]

Just wondering if anyone has tried to see if any of the vette cat back's fit in our cars? Or, axle back instead of cat back?

 

[cubby558]

Corsa makes a cat back system for the XLR. Check their website.

Just wondering if anyone has tried to see if any of the vette cat back's fit in our cars? Or, axle back instead of cat back?

 

[james04xlr]

Corsa makes a cat back system for the XLR. Check their website.

Yah, I know. I put the Corsa system on my DTS. I was asking this question strictly out of curiosity just to see if anyone has done it.

 

[Popbigguy]

When I was changing my "V" system over to the Corsa. I talked to a rep at Corsa about that. I was told,,,, The H pipe, and the over the axle pipes were the same, but the difference is the muffler ends. And when I thought about it it sounds right (?). Our XLR's have a longer "rear end" than the Vette's. If you use a Vette muffler, it won't stick out past the rear valence, and the muffler hangers may be different. When I changed my V over, I had to buy a stock XLR cat back system from Corsa. And then buy a Vette H-pipe. The back hangers on the H-pipe for the XLR are different than the H-pipe hangers on an V. Got kind'of carried away on the $'s this route.

 

[richardyoo]

Popbigguy is right - any c6 vette exhaust will work, but you will need the tips replaced with longer ones...

You also may not get the same sound since the C6 has a different motor than the XLR... so be aware of that.