Changing Your Battery

[XLR ED]

For future refernce is there any thing I need to know about changing the battery in my XLR? Does anything need to be reprogramed after this is done? Do you need to reindex the windows like a C6 Corvette?

 

[harrower]

Same as Corvette - re index windows. Top won't work until re indexed.

Dave

 

[klaptrapper]

REINDEX WINDOWS

How do you do this?? I just changed my battery on my 06.

Hugo

Same as Corvette - re index windows. Top won't work until re indexed.

Dave

 

[mtrocket]

How do you do this?? I just changed my battery on my 06.

Hugo

Roll your windows down and HOLD the button for a few seconds after they bottom out; then roll them UP and keep holding the button for a few seconds after they hit the top

 

[Cadillac Tech]

2005 Cadillac XLR | XLR (VIN Y) Service Manual | Document ID: 2394001 <HR>
#PIC3666B: Convertible Top Does Not Function After Battery Disconnect - keywords accessories accessory body charging electrical inoperative power switch - (Feb 3, 2010)

<TABLE border=0><TBODY><TR><TD vAlign=top width=100>Subject:</TD><TD vAlign=top>Convertible Top Does Not Function After Battery Disconnect</TD></TR></TBODY></TABLE>​

<TABLE border=0><TBODY><TR><TD vAlign=top width=100>Models:</TD><TD vAlign=top>2004-2009 Cadillac XLR and V-Series</TD></TR></TBODY></TABLE>

<TABLE border=0><TBODY><TR><TD vAlign=top width=100></TD><TD vAlign=top>2005-2010 Chevrolet Corvette - equipped with Power Folding Top (RPO CM7)</TD></TR></TBODY></TABLE>​

<HR>This PI was superseded to update model years. Please discard PIC3666A.


<HR>The following diagnosis might be helpful if the vehicle exhibits the symptom(s) described in this PI.

<A href="#ss1-2394001">Condition/Concern:​

Anytime the battery is disconnected or if the battery is in a rundown condition and requires a charge such as in an extended storage period, the windows need to be initialized in order for the top to operate properly. The top will not operate and the windows express up and down will not function unless the window module knows the window position. This will occur anytime power is lost to the window module; for example, when the battery is disconnected.
Recommendation/Instructions:https://www.xlr-net.com/forums/#ss2-2394001​

To initialize the windows both doors must be fully closed, then push the window switches to the up position and hold for five seconds. Once the window module learns the window's position, the top will operate properly. If the door window express up or express down function does not operate, use the window initialization process before attempting any repairs.
Please follow this diagnostic or repair process thoroughly and complete each step. If the condition exhibited is resolved without completing every step, the remaining steps do not need to be performed.
<TABLE width="95%"><TBODY><TR><TD width="80%" align=left></TD><TD width=42 align=middle> </TD><TD width=167 align=middle>

​

</TD></TR></TBODY></TABLE>​

</FORM>